Welcome to Tough Lighting!

LED Tractor Lights

Tough Lighting provides a full range of agricultural aftermarket 12V led tractor lights/led tractor headlights for your Tractors, Combine, Harvesters, Harvest Equipment, Planting Equipment, Tillage Equipment, Hay and Forage Equipment, Chemical Applicators, Ag Trailers. We also have some OE products for John Deere Equipment, Agco Equipment, Caterpillar Equipment, Case IH Equipment, New Holland Equipment, Kubota Equipment. As a professional manufacturer, we can offer you quality light products at a competitive price.

List Grid

Set Ascending Direction

1-10 of 108

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. 1800 raw lumens, LED light. 60-degree flood beam angle and this light is IP69k rated for waterproofness. That means that this light has been tested with high power water jets up to 1400psi and high temps, and it still remains waterproof. Very high quality, high performance light. For you tractor, off road, construction, or any dusty, dirty, wet environment. 2 year warranty. Learn More
    1. LED Type : CREE
    2. Wattage : 20 Watts
    3. Brightness : 1700 lm
    4. LED Color : White
    5. Size : 4 inch
    6. IP Rating : IP69K
    7. Connector : Pigtail
    8. Voltage : 9~32V DC
  2. 4.5 inch Round High Powered LED light. 9 x 3 Watt high power Cool White LEDs. 9~32VDC operating voltage range, IP67 waterproof light. Black painted aluminum housing with integral heatsink and acrylic lens. Available in narrow 30 degree or medium flood 60 degree beam pattern. Stainless steel adjustable stud mounting bracket and optional mounting tabs included. Learn More
    1. LED Type : Bridgelux
    2. Wattage : 27 Watts
    3. Brightness : 1700 lm
    4. LED Color : White
    5. Size : 4.5 inch
    6. IP Rating : IP67
    7. Connector : Pigtail
    8. Voltage : 9~32V DC
  3. 18W LED Tractor Lights with high powered 3 Watt LEDs, 9-32VDC operating voltage range, IP67 waterproof light. Black painted aluminum housing with integral heatsink and acrylic lens. Available in narrow 30 degree or medium flood 60 degree beam pattern. Stainless steel adjustable stud mounting bracket and optional mounting tabs included. Learn More
    1. LED Type : Epistar
    2. Wattage : 18 Watts
    3. Brightness : 1260 lm
    4. LED Color : White
    5. Size : 5.5 inch
    6. IP Rating : IP67
    7. Connector : Pigtail
    8. Voltage : ~9~32V DC
  4. 7" Square 80W LED Work Light

    Item No: WL-0801

    7" square 80w led work light, 8 x 10 Watt high power CREE XML cool white LEDs, 9-32VDC operating voltage range, 30 degree spot beam and 60 degree flood beam are available, Stainless steel adjustable mounting brackets. Learn More
    1. LED Type : CREE
    2. Wattage : 80 Watts
    3. Brightness : 7200 lm
    4. LED Color : White
    5. Size : 7 inch
    6. IP Rating : IP67
    7. Connector : Pigtail
    8. Voltage : 9~32V DC
  5. 4.5" Square 48w led work light, 16 x 3 Watt high power LEDs, 9-32VDC operating voltage range, 30 degree spot beam and 60 degree flood beam are available, Stainless steel adjustable mounting brackets. Learn More
    1. LED Type : Bridgelux
    2. Wattage : 48 Watts
    3. Brightness : 3800 lm
    4. LED Color : White
    5. Size : 4.5 inch
    6. IP Rating : IP67
    7. Connector : Pigtail
    8. Voltage : 9~32V DC
  6. 30W LED Work Light use the high intensity 5w cool white Osram LEDs, IP67 waterproof, 9-32VDC operating voltage range, flood beam, Stainless steel adjustable mounting brackets. Learn More
    1. LED Type : Osram
    2. Wattage : 30 Watts
    3. Brightness : 2520 lm
    4. LED Color : White
    5. Size : 4.5 inch
    6. IP Rating : IP68
    7. Connector : Pigtail
    8. Voltage : 9~32V DC
  7. 5" Square 48W LED Work Lamp

    Item No: WL-0482

    5" Square 48w led work lamp, 16 x 3 Watt high power CREE cool white LEDs, 9-32VDC operating voltage range, 30 degree spot beam and 60 degree flood beam are available, Stainless steel adjustable mounting brackets. Learn More
    1. LED Type : CREE
    2. Wattage : 48 Watts
    3. Brightness : 3800 lm
    4. LED Color : White
    5. Size : 5 inch
    6. IP Rating : IP67
    7. Connector : Pigtail
    8. Voltage : 9~32V DC
  8. 4" Square 27W LED Work Lamp

    Item No: WL-0271

    4 inch Square High Powered LED light. 9 x 3 Watt high power Cool White LEDs. 9~32VDC operating voltage range, IP67 waterproof light. Black painted aluminum housing with integral heatsink and acrylic lens. Available in narrow 30 degree or medium flood 60 degree beam pattern. Stainless steel adjustable stud mounting bracket and optional mounting tabs included. Learn More
    1. LED Type : Bridgelux
    2. Wattage : 27 Watts
    3. Brightness : 1700 lm
    4. LED Color : White
    5. Size : 4 inch
    6. IP Rating : IP67
    7. Connector : Pigtail
    8. Voltage : 9~32V DC
  9. Farmer doesn't stop working until their job is done, Add double light output while decreasing the power on your tractor's charging system. Push-On connector play replacement for your John Deere's RE306510 sealed beam light. The 60 degree flood beam of 4 x 3W Cree cool white LEDs will ensure you can always see what you should see. Learn More
    1. LED Type : CREE
    2. Wattage : 12 Watts
    3. Brightness : 960 lm
    4. LED Color : White
    5. Size : 5.5 inch
    6. IP Rating : IP67
    7. Connector : Push-On
    8. Voltage : 9~32V DC
  10. 8 x 3 Watt high power cool white LEDs. 9~32VDC operating voltage range, IP67 waterproof light. Black painted aluminum housing with integral heatsink and acrylic lens. Available in narrow 30 degree or medium flood 60 degree beam pattern. Stainless steel adjustable stud mounting bracket and optional mounting tabs included. Learn More
    1. LED Type : Bridgelux
    2. Wattage : 24 Watts
    3. Brightness : 1520 lm
    4. LED Color : White
    5. Size : 5.5 inch
    6. IP Rating : IP67
    7. Connector : Pigtail
    8. Voltage : 9~32V DC

List Grid

Set Ascending Direction

1-10 of 108

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

LED Tractor Lights Buyers Guide

A tractor is an important piece of equipment in farming that helps the farmers pick and haul crops. It’s even useful in urban areas to pick up sand or trash. Like any other vehicle, tractors also use lights to increase visibility, especially at night.

You’ll find everything you need to know in this guide before supplying or buying LED tractor lights.

 

What are LED Tractor Lights?

LED tractor lights are LED lights used on the front and back of agricultural tractors, combines, sprayers, and other agricultural equipment. They can increase visibility and help farmers work better at night. Usually, LED tractor lights include LED tractor headlights, LED tractor work lights and LED tractor tail lights, etc.

 

Benefits of Installing Tractor LED Lights

Lights on your tractor aren’t optional, as they are essential for work and safety. However, choosing LED tractor light comes with even more benefits:

 

● Increased Visibility: LED tractor lights come in varying watts and lumens and generally offer a wattage and lumens ratio. As a result, they can easily illuminate the area around the vehicle, allowing you to work at full visibility even in the darkest hours of the night.

● Better Light Distribution: LED tractor lights don’t just focus in one direction or a single area; rather, the rays spread out evenly to illuminate all the work areas. With a tractor, you need visibility all around to prevent accidents. This is where LED lights with better light distribution come in handy.

● Cost-effectiveness: As compared with incandescent bulbs, LED lights are straight-up cost-effective. The technology has been getting cheaper over time, while the quality is improving. In addition, running LED lights for long hours doesn’t use much power, which doesn’t drain the battery in your tractor.

● Ease of Installation: LED tractor lights are not that difficult to install. It pretty much works as a wire connection and just needs screwing in a few screws around the light housing.

● Durable: LED lights, in general, are quite durable and can last up to 50,000 hours. Since tractors typically work in rough conditions, this is important. This way, you won’t have to replace the lights again and again.

 

What are the Different Types of Tractor LED Lights?

Tractor LED lights differ by where they go on the vehicle and what purpose they serve. Here are the types of these lights:

 

● Headlights: Headlights on a tractor can be round, square, and even triangular. These are typically low beam or high beam lights, with the latter providing long-distance visibility.

● Taillights: Taillights are located on the back of the tractor. These serve as safety lights on the road that make the tractor visible to the cars behind it. Taillights also have brake lights that light up when the tractor is braking, just like any other vehicle.

● Indicators/Hazard Lights: Hazard lights can also be LED lights that help indicate the side the tractor is moving to. These may also be used in an emergency.

● Work Lights: While other lights are present on almost every vehicle, work lights are often found on equipment like tractors. These may be installed either on top of the vehicle, front or back, or even on both sides. This way, it helps increase visibility, and the lights work in addition to the headlights. These lights help illuminate the area surrounding the tractor and not just the place in front of it.

● Offroad Light Bar: This is often used in place of work light or with the work light. It’s a long bar of LED lights installed over the windscreen of the tractor. Again, this light fixture helps increase visibility on dangerous terrains where the driver may need even more light to drive and work safely.

● Rooftop Beacon: Some tractors also have rooftop beacons to indicate that the vehicle is at work. It can come in handy if the tractor is working on a road with traffic so that other cars can divert or reduce speed.

 

Where are Tractor LED Lights Used?

Tractor LED lights are used mainly on the front and back of the vehicles. In addition, work lights, beacons, and bar lights are installed on the tractor's roof. LED lights are compatible with all brands of tractors these days, including older models that originally came with incandescent lights.

 

How to Choose Tractor LED Lights?

Whether you’re a company buying tractors for your workforce or a farmer getting one for your farm, picking quality Tractor LED lights is important. Here’s what you should consider before buying Tractor LED lights:

 

Brand

The number one consideration should be the brand of your tractor. You should ensure that the LED light you’re buying is compatible with the make and model of your tractor. While some tractor lights have universal-fitting lights, others may have specific shape or wattage requirements that must be met. For example, if you want to buy LED lights for John Deere tractor, it's better to get the lights with the OEM numbers. So that the size and connector of the lights will be correct.

 

Type

Aside from the brand, you also need to determine the exact type of light you need. You cannot interchange lights on a vehicle as they are very specific. With headlights, taillights, and even hazards, you also have to consider the side they go on (right or left).

 

Wattage and Lumens

This is also an important consideration, especially for headlights and work lights, because you want maximum brightness> However, at the same time, you wouldn’t want anything too bright to make it unsafe for other vehicles or people.

For work lights, a light output of 1000 to 3500 lumens is efficient enough.

 

Suitable for Rough Conditions

Tractors often work in very rough conditions like extreme heat, snow, fast winds, rain, and dust. This means the LED lights on it should be durable and reliable enough to withstand those conditions.

Ideally, these lights should be water, heat, and dust-proof. Temperatures on the field can go as high as 115 degrees, and the tractor itself can heat up. Nevertheless, the light should have higher heat resistance and stay working even when the tractor heats up.

 

How to Install LED Tractor Lights?

The installation process of an LED tractor light depends on the type of light you’re installing. For instance, installing headlights or hazards is pretty straightforward. However, if you’re adding an auxiliary work light or work light bar, you may need to make a circuit connection first, perhaps through a relay.

 

Here’s how you can install an LED tractor headlight:

Step 1: Remove the installed light first by unscrewing the screws of the light housing. This may differ for different tractors.

Step 2: Disconnect the light from the holder.

Step 3: Check if the holder is working properly with a tester.

Step 4: Plug the new LED light into the holder. (Most LED headlights come with cable and pin to plug into the holder)

Step 5: Screw the light into the housing.

 

Why Choose LED Tractor Lights From Tough Lighting?

Tough Lighting is a leading LED tractor lights manufacturer in China. We provide the full range of LED tractor lights for John Deere, Case/IH, New Holland, Kubota, Massey Ferguson, Agco, Allis Chalmers. Wholesale and ODM/OEM are all available.

 

Conclusion

Using LED tractor lights can be cost-effective. It’s not just an issue of cost but also safety. With better lighting around the tractor, one can work more efficiently and safely. It’s also easy to increase work lights on a tractor by making extra connections.